Items included in the 2 pack kits

 

2– one quart wide mouth mason jar
2– Plastic jar cap
1– Inline fuse holder
2– Fuse 10 amps
1– Relay set
    Relay (5pin Bosch style relay)
    Relay connector
   10-12 gauge terminals (2)
   14-18 gauge terminals (2)
12 gauge wire automotive (6’)
18 gauge wire automotive (6’)
1– 14-18 gauge splice connector
1– 10-12 gauge butt connector
4– 10-12 gauge 1/4”eyelet terminals
2– 10-12 gauge 5/16” eyelet terminal
4– 1/4”x1” stainless steel bolts
8– 1/4” stainless steel washers
4– 1/4” stainless steel hex nuts
4– 1/4” stainless steel wing nuts
4– 90 degree 1/4” barbed fittings
1/4” vacuum line (automotive) 6’

1—1/4” barbed “T” fittings

2– tower (slotted, drilled, notched, and wrapped with316L SS .035” wire)

Since there are variations between a cell’s hook up on a gasoline engine and one  for a diesel engine, we are including instructions for the hook up for a diesel engine application.

We do not supply direction for the building of these cells. These cells are the design of Water 4 Gas and we respect the copyrights of their manuals. Water 4 Gas offers the manuals and other useful information of the construction of these cells. To purchase the manuals just click of the WATER4GAS.com link below.

 

Main Cell:

1– one quart wide mouth mason jar
1– Plastic jar cap
1– Inline fuse holder
2– Fuse 20 amps
1– Relay set
    Relay (5pin Bosch style relay)
    Relay connector
   10-12 gauge terminals (2)
   14-18 gauge terminals (2)
12 gauge wire automotive (6’)
18 gauge wire automotive (6’)
1– 14-18 gauge splice connector
1– 10-12 gauge butt connector
2– 10-12 gauge 1/4”eyelet terminals
2– 10-12 gauge 5/16” eyelet terminal
2– 1/4”x1” stainless steel bolts
4– 1/4” stainless steel washers
2– 1/4” stainless steel hex nuts
2– 1/4” stainless steel wing nuts
2– 90 degree 1/4” barbed fittings

1—1/4” barbed “T” fittings
1/4” vacuum line (automotive) 6’

1– tower (slotted, drilled, notched, and wrapped with316L SS .035” wire)

Add on cells (5) include the following:

1–One quart wide mouth mason jar
1–Plastic jar cap
2– 2.17”x5.75”x1/4” Plexiglas sheets
15’– 316L stainless steel wire .035”
2– 10-12 gauge 1/4”eyelet terminals
2– 1/4”x1” stainless steel bolts
4– 1/4” stainless steel washers
2– 1/4” stainless steel hex nuts
2– 1/4” stainless steel wing nuts
2– 90 degree 1/4” barbed fittings
1/4” vacuum line (automotive) 2’
1– tower (slotted, drilled, notched, and wrapped with316L SS .035” wire)

 

Additional Items to connect cells to a Diesel Engine (included in purchase)

1—inlet manifold with appropriate barbed and line fittings

1—outlet manifold with appropriate barbed fittings

1 - 1/4” OD air line fitting

6’ - 3/8” fuel line

1—1/8” NPT air line valve

6”- 1/4” OD air line

We can also adjust the wire and tubing lengths to fit your particular application for a minimal cost.

Since there are variations between a cell’s hook up on a gasoline engine and one  for a diesel engine, we are including instructions for the hook up for a diesel engine application.

 

We do not supply direction for the building of the cells. These cells are the design of Water 4 Gas and we respect the copyrights of their manuals. Water 4 Gas offers the manuals and other useful information of the construction of these cells. To purchase the manuals just click of the WATER4GAS.com link below.

Item Number: 265006

Item Number: 265007

Items included in the 6 pack kits