55 AMP PWM (plus width modulator) Controller:

Extreme Duty PWM with Dual Cooling Fans and Frequency Adjustment

This Pulse Width Modifier has 6 output transistors that are rated over 155 amps each.

Features:

*Two 60MM ball bearing cooling fans at 4500 RPM mounted with 8 screws
* Supply voltage: 8- 18 VDC  Can be wired for 24V
* Output current: 0-55 amperes continuous current at 100Hz!
*Output current: 0-45 amperes continuous at 3Khz
* Duty ratio can be set from 0% to 100%
* Frequency adjustable by jumper from 300-3000hz or 100Hz fixed
* Red power on LED
* 3 spade connectors for each power output for three time the power handling
*Board PCB size L 5.25" x W 3.5" x H 2"

Price: $89.99

SKU/Item Number: 265211

55AMP PWM PULSE WIDTH MODULATOR  FOR HHO HYDROGEN GENERATOR

55 AMP PWM (plus width modulator) Controller (Fan Cooled Box):

Extreme Duty PWM with Dual Cooling Fans and Frequency Adjustment Mounted in a fan cooled box

This Pulse Width Modifier has 6 output transistors that are rated over 155 amps each.

Features:

*Two 60MM ball bearing cooling fans at 4500 RPM mounted with 8 screws
* Supply voltage: 8- 18 VDC  Can be wired for 24V
* Output current: 0-55 amperes continuous current at 100Hz!
*Output current: 0-45 amperes continuous at 3Khz
* Duty ratio can be set from 0% to 100%
* Frequency adjustable by jumper from 300-3000hz or 100Hz fixed
* Red power on LED
* 3 spade connectors for each power output for three time the power handling
*Board PCB size L 5.25" x W 3.5" x H 2"

55AMP PWM PULSE WIDTH MODULATOR  FOR HHO HYDROGEN GENERATOR FAN COOLED BOX

Price: $109.99

SKU/Item Number: 265210

PWM (plus width modulator) Controller:

This PWM will produce a true 35Amps continuous power output
 for your HHO cell

This is a completely new design made with supper heavy duty parts

FREQUENCY ADJUSTMENT 400hz to 3khz
*New output transistors*
TWO 155 Amp HexFET Power MOSFETs
The old MX066 had two 80 amp MOSFETs

SPECS

Power supply:               8-18 VDC

Load voltage:                8-18 VDC  35A TRUE RMS

Output:                          PWM (Pulse Width Modulation) for controlling DC loads.

Output frequency :       100Hz fixed at 35Amps or 400-3KHz adjustable at 30Amps

Adjust DC pulse width output range: 0% to 100%

Board size:                    W 2.633" x L 4.55" x H 1.533"

Default frequency setting: 405Hz to 3KHz (Move jumper to open set to 100Hz)

Connection is by 8 spade connectors, 2 per power contact

Fan is for 12V systems .

If you need the PWM set for 24V operation(24V fan) Please contact us before purchase

35 Amp PWM FAN COOLED BOX for EASY MOUNTING

Price: $69.99

SKU/Item Number: 265209

35 AMP PWM (plus width modulator) Controller:

This PWM will produce a true 35Amps continuous power output
 for your HHO cell

This is a completely new design made with supper heavy duty parts

FREQUENCY ADJUSTMENT 400hz to 3khz
*New output transistors*
TWO 155 Amp HexFET Power MOSFETs
The old MX066 had two 80 amp MOSFETs

This PWM has many new features including
**Power ON LED *
**8 spade connectors for twice the current handling of other units*
**New  larger heat sinks for greater power handling*
**4 screws mounting the heat sinks to the circuit board*
**TWO Next generation 155A  Power HEXFETT MOSFETS  output transistors*
**Frequency adjustment from 400Hz to 3KHz*
**Larger 3 Amp pre-driver*
**Wire reinforced solder traces on the circuit board*
Massive Power control!

35 Amp PWM (frequency control 400Hz to 3kHz)

Price: $45.99

SKU/Item Number: 265208

PWM Pulse Width Modulator to power your  HHO  Hydrogen Generator
These are a completely new design made with supper heavy duty parts

30 AMP PWM (plus width modulator) Controller:

This PWM will produce a true 30Amps continuous power output
 for your HHO cell

Your HHO Cell will run cooler and make more mono atomic hydrogen which has greater ability to increase fuel mileage.
The MX66 Pulse Width Modulator has two Next Generation IRF3105 HEXXFET output Transistors rated at over 100 Amps each. If your cell draws around 30A or less this PWM is right for your needs.

 40mm 4,800 RPM ball bearing cooling fan to each unit to increase the power handling.
The fan is mounted with two screws for a totally secure mounting system.
Some others are using tape strips or even glue which is not a good idea on a hot heat sink

TECHNICAL SPECIFICATIONS:
Power supply:                 12/24 VDC via. jumper
Load voltage:                  12/24 VDC  30A max
Output: PWM (Pulse-Width Modulation) for controlling DC loads.
Output frequency :         100Hz.
Adjust DC output range: 0% to 95%
Board size is  3.9"L x 1.7" W x 1.6"
The fan is for 12V systems only

Instructions included

Price: $38.99

SKU/Item Number: 265206

30 AMP PWM (plus width modulator) Controller (with Box/Fan):

This PWM will produce a true 30Amps continuous power output
 for your HHO cell

Your HHO Cell will run cooler and make more mono atomic hydrogen which has greater ability to increase fuel mileage.
The MX66 Pulse Width Modulator has two Next Generation IRF3105 HEXXFET output Transistors rated at over 100 Amps each. If your cell draws around 30A or less this PWM is right for your needs.

 40mm 4,800 RPM ball bearing cooling fan to each unit to increase the power handling.
The fan is mounted with two screws for a totally secure mounting system.
Some others are using tape strips or even glue which is not a good idea on a hot heat sink

TECHNICAL SPECIFICATIONS:
Power supply:                 12/24 VDC via. jumper
Load voltage:                  12/24 VDC  30A max
Output: PWM (Pulse-Width Modulation) for controlling DC loads.
Output frequency :         100Hz.
Adjust DC output range: 0% to 95%
Board size is  3.9"L x 1.7" W x 1.6"
The fan is for 12V systems only

Instructions included

Price: $49.99

SKU/Item Number: 265207